750,000+ dünya çapında satılan rötuş seti
DHLUPSFedEx

ACURA aracınızdaki çizik ve taş izi nasıl giderilir

ACURA aracınızdaki bir taş izi ya da çizik için kaporta boya servisine gitmenize gerek yok. Tam fabrika boya kodunuza göre eşleştirilip evde uygulandığında, bir saatten kısa sürede yok edebilir — ve paslanmasını durdurabilirsiniz. İşte tam olarak nasıl.

  1. 1

    Assess the damage

    Run a fingernail across the mark. If it catches, it has gone through the clear coat into the colour — that is what touch-up paint fixes. If it does not catch, a polish may be enough. Deep gouges that reach bare metal on your ACURA should be primed first so they do not rust.

  2. 2

    Find your exact paint code

    Guessing the colour never matches. Every ACURA has a factory paint code on a sticker (usually in the door jamb, under the bonnet or in the boot). Read it, and match your touch-up kit to that exact code — not by eye.

    ACURA boya kodunuzu nerede bulursunuz →

  3. 3

    Clean and prep

    Wash the area, then wipe it with the prep solution and let it dry fully. Paint will not bond to wax, grease or moisture. Mask around the scratch if it is on a body line.

  4. 4

    Apply in thin layers

    With the micro-brush, lay the colour-matched paint into the scratch in thin coats — build up gradually, do not flood it. Let each coat dry before the next.

    Tam uygulama rehberi (11 dil) →

  5. 5

    Level and finish

    While wet, glide the application card flat to lift the excess so paint stays packed in the scratch. Once dry, run the corrector over it and finish with the clear coat for a glossy, factory-matched result.

ACURA aracınız için tam rengi bulun

Aşağıdan renginizi seçin ya da eksiksiz ACURA boya kodu kartelasına göz atın. Her set fabrika kodunuza göre eşleştirilir — renk eşleşmesi garantili, 30 gün para iade.

Sık sorulan sorular

Does touch-up paint actually work on a ACURA?

Yes — for stone chips and scratches that have gone through the clear coat into the colour. Matched to your exact factory paint code and applied in thin layers, the repair blends in and protects the metal underneath. It is not for deep dents or large panels — those need a body shop.

Will the colour really match my ACURA?

It matches when it is mixed to your exact factory paint code, not guessed by eye. That is why finding your code first matters. Our kits are matched to the code — colour-match guaranteed, or 30-day money back.

How long does the repair take?

Most chip and scratch repairs take 20–40 minutes of hands-on work, plus drying time between coats. No booking, no waiting for a body shop.

What happens if I leave a scratch unrepaired?

A scratch that reaches bare metal will start to rust, and rust spreads under the paint around it — turning a cheap touch-up into an expensive panel repair. Sealing it early is the whole point.